Welders, both professionals and hobbyists, are sometimes doubtful about the new method in cleaning weld. Some say that the new process is too expensive. Others claim it is not that fast compared to the traditional way of cleaning weld through a pickling paste. This article will debunk five of the top myths about stainless steel weld cleaner.
1. It’s Too Expensive
A stainless steel weld cleaner is a bit more on the expensive side than the traditional chemical pickling paste. However, if you look at it on the cost-efficient side in the long run, you will not have second thoughts about purchasing such a cleaner.
First, it is safer to use, so you do not have to worry about investing in the usual protective gear when you use the chemical pickling paste. With the stainless steel weld cleaner, you have to wear protective gloves, and you are good to go. Next, you should consider that the return of investment for a good quality cleaner would take only half a year. After that, it is all profits when welding is your bread and butter.
Another thing to look at is the fact that you save time. Hence, you have more time to work on other welding projects. You also produce cleaner, longer-lasting, and better outputs. This would again equate to more customers lining up for your services.
2. It Doesn’t Work as Fast
No job gets done quickly, so you should not expect to finish your welding job in just seconds as if it is a magic wand. Using a stainless steel weld cleaner will significantly cut down when you arrive at a clean finish, but it would still take minutes.
However, with such a product, you eliminate the time of setting up the cleaning portion of the output and the dismantling of the machine for the cleaning. This newer type of cleaner is so portable that you can take it anywhere.
With a stainless weld cleaner, you neutralize, rinse, and wipe down.
3. The Vapours from the Machine Are Not Safe
The number one priority when doing a welding job is safety and health. When the stainless steel weld cleaner got introduced to the market, one of its best points was it eliminates the dangers of the pickling paste chemical. The vapours coming from the machine are relatively safe because there is only a low cleaning fluid concentration. What makes most of the smoke is just water produced by the heat.
4. It Cannot Do Small Jobs
Unlike the traditional tips for cleaning that were chunkier, there are different types of brush for your specific needs. Because of this, the stainless steel weld cleaner can now reach into the littlest spots and can work on even the tiniest welding jobs.
In line with this, it is also not true that it is too expensive to change the brushes. In general, the brushes can be used for up to 50 hours. Considering that you finish the job in just minutes, you will not have to worry about frequently changing the brush. It depends on your take and how long you are looking at using these cleaners.
There are other factors to consider when making the switch from traditional to stainless steel weld cleaners. Some of these factors include your budget and the amount of work you expect to do in the future. It would help if you discuss these with an expert to get the best advice on what to use. They would also give you more insight if it would suit you and your needs.