Heat Pump Repairs on a Budget – Your Guide to DIY Fixes


Are you looking for ways to repair your heat pump on a budget? Heat pumps can be expensive to maintain, but luckily there are some DIY fixes that you can do yourself. In this guide, we’ll provide 10 easy tips and tricks to help you complete heat pump repairs without breaking the bank. From checking the thermostat settings to properly vacuuming the evaporator coils, it’s time to get into the nitty-gritty of heat pump repairs in Lansdale, PA! So let’s get started.

  1. Check Your Thermostat Settings: The temperature settings on your thermostat should be properly adjusted for your heat pump system to work efficiently. Start by setting the fan speed and temperature levels according to the manufacturer’s instructions, and then check that the system is running correctly.
  2. Clean the Coils: The condenser coils of your heat pump need to be kept clean for them to work properly. Vacuum any dirt or debris from the evaporator coils, and use a commercial coil cleaner to remove grease or oily buildup on the outside of the coils.
  3. Replace the Filters: Clean or replace the air filter in your heat pump at least once every three months to maximize efficiency. If you have a reusable filter, make sure to wash it out with hot water and allow it to dry completely before reinstalling it.
  4. Unclog Debris from Outdoor Unit: Clear any debris that may be blocking the outdoor unit, such as leaves, sticks, or grass clippings. This will ensure your system can intake and exhaust air properly for efficient operation.
  5. Tighten Loose Screws & Bolts: Check all screws and bolts on the outside of your heat pump – they should be securely fastened so they don’t come loose. If you find any that need tightening, use a screwdriver or wrench to secure them.
  6. Check the Electric Connections: Inspect the electrical connections on your heat pump for corrosion, and make sure all wires are securely attached. Loose wiring can cause major problems with your system’s operation, so it must be tight and in good condition.
  7. Clear Away Obstructions: Make sure there is plenty of room around the outdoor unit of your heat pump – obstructions such as bushes or branches can inhibit airflow and reduce efficiency.
  8. Check for Leaks: Look carefully around the outside of your heat pump for signs of water leaks – these will usually appear as damp spots on the ground or pools of water. If you find any, contact an experienced HVAC technician for inspection and repairs.
  9. Increase Airflow: The air filter in your heat pump should be checked regularly to make sure it is not clogged with dirt and debris, which can reduce airflow, cause overheating, and damage components. Clean or replace the filter as needed.
  10. Check Refrigerant Levels: Low refrigerant levels can cause your heat pump system to operate inefficiently – have a professional inspect and top up the levels if they are low.

By following these 10 tips, you can keep your heat pump running efficiently and save money on costly repairs. If you’re still having issues with your system, don’t hesitate to reach out to a local professional HVAC technician in Lansdale, PA for additional help and advice.

Tips To Consider While Hiring A Pro For Heat Pumps and Boilers Services

  1. Look for experience: Before you hire a professional, check the years of experience they have in installing, repairing, and maintaining heat pumps and boilers. A good pro will be able to offer you quality services at competitive prices.
  2. Get references: Ask around for family members or friends who have used similar services before; you can also ask for references from businesses that offer such services. This way, you can make sure that the contractor you are hiring is reliable and experienced enough to do the job right.
  3. Check credentials: Make sure that the professionals you hire have valid licenses and certifications necessary to safely install and repair heat pumps and boilers as required by local regulations. For example, when hiring for boiler installation in Doylestown, PA, you should check that the contractor has all necessary permits and licenses issued by the Pennsylvania Department of Environmental Protection.
  4. Read reviews: Reading online reviews can help you get a better understanding of the quality of services offered by each particular contractor. Make sure to read through customer feedback and ratings before hiring any particular pro for your heat pump or boiler project.
  5. Compare prices: When it comes to prices, make sure to compare quotes from different professionals to find the most suitable one for your budget. Don’t choose someone just because they offer lower rates without considering other factors such as years of experience, credentials, and customer reviews. Contact Bucks County Residential Heating & Cooling at (267) 691-0990 to learn more or book an appointment!