Will Rainy Water Delay the Construction of My Swimming Pool?

133

Ideally, you would want to install your new swimming pool at the start of the summer season. This is also the time when a lot of homeowners think about upgrading their backyards and patios. However, it can be costly to have your pool installed during the peak season. That is why you should consider constructing your pool during the offseason.

One of the disadvantages you can face with getting your pool installed during the offseason is that the weather can be a problem. The weather actually plays a very important role when it comes to the installation of a pool. When there is bad weather, the construction of a pool can be delayed.

How does pool weather affect the installation of a pool?

If you were installing a gunite pool, then you would be highly dependent on the weather for a successful installation. This is as gunite needs to be cured for at least twenty eight days. This is why should it rain, the process of installing a gunite pool can become delayed. Should it be raining heavily, then irrespective of the kind of pool, the pool installers will need to take a break.

This is why you should pay careful attention to the weather forecast before you install your pool. This will enable you to better understand what you can expect from the process. If you hire a dependable pool contractor, then they will also be able to help you with finding the best time to install your pool. It’s important to be aware that you should expect weather delays, especially if rainy weather is forecast.

But why does rainy weather affect a factory pools perth installation? Here are a few reasons why:

The construction site needs to be dry

Before the pool can be installed, the construction site needs to be dry. In case it has rained recently, then you’ll need to wait until the ground is dry before installation can begin. This can take some time.

Ideally, the ground needs to be hard enough, such that the excavation machinery’s weight doesn’t pose a problem. It also needs to support the rebar, as well as the plumbing of the pool. That is why it may take up to a few weeks for the construction site to be dry enough. The actual time you’ll need to wait will depend on various factors, such as the climatic conditions in your area and more.

In case it rains after the excavation has been made, then the pool installation will need to be rescheduled as well. Keep in mind that rainwater will become trapped in the ground that is excavated. For this reason, it takes longer for rainwater to dry when it comes to the excavated ground. It is also possible for the pool contractor to consider draining the water out. This can be done with the help of specific equipment. Rainwater can cause delays when it comes to the construction as well as the installation of a pool.

Rainfall can damage the structure of the pool

Should rainwater accumulate along the walls of the excavated pool, it can cause the walls to collapse. It’s possible for soil that is soggy to crumble as well. This can interfere with the foundational structure of your swimming pool. If you have a roof without any gutters, then the adverse effects from the rainfall can be felt worse. This is why you should think about installing rain gutters on the roof. You can also think about setting up a system for drainage in your backyard. This helps to prevent water from accumulating in the areas that were excavated.

Wind and pool construction

Wind can also delay the construction and installation of a new swimming pool. If there are strong winds, then it can blow debris on top of gunite or plaster. This can have a negative effect on creating a uniform surface for your pool. When there is a lot of wind, plaster also has a tendency to become dry really fast. This leads to the formation of cracks on the surface of the pool. It’s also important to note that if the conditions are windy, then concrete will not dry well, as well.

You should note that delays in pool installation are both an inconvenience to you, as well as the pool contractor. For this reason, if there are delays, you should not get mad at the pool contractor. They also want to get done with the job as soon as possible. If you want to rest assured that the quality of your installed pool will be good, then you’ll need to hire a pool contractor who is dependable.

Is it possible to install an above ground pool when it rains?

An above-ground pool should never be installed during rain. This is as it’s possible for the rain to wash off the walls in the area that has been excavated. This leads to the pool getting improper support and can affect you in the long run.

Keep in mind that when it’s raining, the soul that’s around the pool will also be denser. This will lead to the above ground pool sinking. It will sink in the ground itself. The excavated area needs to be completely dry before an above ground pool can be installed.

Rain and the quality of pool water

Rain can also have a negative impact on the quality of pool water. Should it rain, then the water in the pool gets diluted. This can lower the level of chemicals in the pool. This leads to water chemistry that is unbalanced. With rain, dirt, debris, as well as bacteria can also make their way into the pool.

This is why after it rains, it’s important to check the chemistry of the water in your pool. If needed, more chemicals should be added as well. Usually, you’ll need to add some chlorine to the pool after it rains. This applies to heavy rainfall, not light showers.

Conclusion

Rainwater can delay the construction and installation of your new swimming pool. For this reason, consider keeping an eye out for the weather reports when deciding on a time to install your pool.