RooHome – Your Home Design & Plans

How to Choose The Best-Led Tube Light for House

At the time of essence or redecorate your home, you are tough to procure the best tube lights for this so that you can brighten your home well. Today tube lights and bulbs have become the subject of historical discussion, so many options have become available in front of us that it has become very difficult for anyone to buy and decide what is good for their home. In the past, we used to get mostly ordinary bulbs or fluorescent tube lights which were replaced by CFLs and energy-efficient fluorescent tube lights early in this century. But at present, the LED tube light or bulb is the best option for you: https://www.lepro.com/led-tube-light

There are many energy-efficient options available in the world today and our effort in saving electricity has always been to help the consumers aware of all their options. Modern energy-efficient LED tube lights or bulbs may be somewhat less expensive than older alternatives but they offer much higher value. In this post, we will discuss the cost or prices of these options, their wattage, and the benefits that accrue to them. We will also discuss the guide for LED tube lights or bulb shopping and some products which will help you not only to save electricity but also to make good lighting. We will also discuss how good the lighting is for your room and how to decide the amount of light.

Fluorescent Lamp

Fluorescent lamps are better than incandescent bulbs (50–70% better at providing the same amount of light) and have been on the market for quite some time. These began to come in the form of tube lights (something most of us have known since childhood) and later came in the form of CFLs to allow retro fitment in the holder of incandescent lamps.

Fluorescent tube light

Each fluorescent lamp has a ballast (which is initially required to generate high volt strike the arc and later to stabilize the current) and a tube. In the past, tube lights came with electromagnetic ballasts, which used to flicker initially. It was then replaced by an electronic ballast that protects fluorescent lamps from flicker. The electromagnetism counterweight (now only for actual education) ingest much less power than an electronic counterweigh. Most tube lights today have electronic ballasts.

Over time the tube lights were developed in different types: T12, T8, and T5. These numbers represent the diameter of the tube (T12-3.81 cm or 12/8 “, T8 is 2.54 cm or 1 inch and T5 is 1.69 cm or 5/8”). The lower the number, the higher the efficiency. A T12 tube light with an electromagnetic ballast typically consumes 55W of power, but a T5 with an electronic ballast consumes only 28W of power (the comparison is for 4 feet of tube light). Thus providing about 50% power savings over a T12 tube light compared to a T5. T8s are typically 38W tube lights and are superior to T12s. Even though the T5s were a bit expensive during their golden years, the replacement of the T8 or T12 would pay back within a year. With all, Her life was very good and she worked for at least 3-4 years. Many organizations also offer a 1-2 year renewal commitment on the T5. Thus the payback occurs within the warranty period. However, fluorescent tube lights are becoming obsolete these days and are being replaced by LED tube lights.

LED Tubelights

LED tube lights are a good alternative to regular tube lights. They are a line source of light and thus they cover a large area. These days there are many options of LED Tubelights available in the market: 18 Watt, 20 Watt, 22 Watt, etc. In the idiom of light yield(or flare output), a 20 watt LED tube light is alike to a mature 40 watt T-8 and 27-watt T-5 tube light. And you can get more LED lights here: https://www.lepro.com/

When it comes to choosing an LED tube, 4 things should be considered:

  1. The type of base
  2. The type of ballast
  3. Length and power
  4. Color temperature
  5. The type of base

The most common type of tube is the T8 LED tube. It has a G13 base, with a 13mm spacing between the two base pins.

The other most common tube is the T5 LED tube which has a G5 base, with 5mm spacing between its two pins.

There are two types of ballast. The conventional ballast (EM) uses a choke and flashes the tube on start-up, and the more modern electronic ballast (HF) does not use a choke. This type of ballast directly lights the tube without blinking. T5 tubes only work with electronic ballast.

For fluorescent tubes, the power depends on the length, which is not the case for T5 LED tubes for example. It is therefore important to look at the wattage of your old tube to find the corresponding LED tube for it. To make it easier for you, we always specify it in the name of our LED Tubes.

T8

18W = 60cm tube

36W = 120cm tube

58W = 150cm tube

T5

49W = 145cm tube

54W = 115cm tube

80W = 145cm tube

The last criterion to take into account when you want to choose an LED tube is the color temperature of it. The color temperature depends on the use for which the LED tube is intended. To learn how to choose the color temperature for your tube,

Exit mobile version