How to Clean Water Stains and Mold from Framed Glass Shower Doors

547

In your quest to maintain a perfectly clean and clear glass shower door, nothing frustrates your efforts like water stains and molds. Slowly, the stains accumulate until your glass becomes completely opaque. However, you can’t afford to allow it to get so bad that you can’t see through or feel the glass patterns.

Interestingly, glass stains are a source of concern for every homeowner. For those that know how to do it the right way, the challenge will be the strength to do it often. This guide is for you, however, if you are looking for ways to get rid of those stubborn shower door stains and mold.

How do water stains develop?

Getting that pristine look of glass, you see on Tv is not always easy but you deserve it. Instead, you are left with deeply stained glass. You see, these stains are caused by the presence of some minerals (magnesium and calcium) in high concentration in water.

In your home, your bathrooms are the likely victim because of the amount of water that’s often used in the bathroom. In your bathroom, with constant contact with water, these minerals build up and become stubborn stains and even mold.

How Mold appears on the Glass Frames?

Mold loves any place where there’s a lot of moisture. And bathroom windows and glass doors are often the perfect place for molds to thrive. In your home, the presence of these molds can cause severe irritation, allergies, and other nasal issues.

They are even more prevalent in places where there are leaky faucets and pipes. And no time should be wasted in removing them once they are found. Listen, molds are very quick to spread, so failure to remove them early will prove disastrous – causing you to spend more time and money on future remodeling.

Walls that are always in constant contact with water can be a good breeding site for mold. Which can subsequently spread to the shower or window glass frame and the glass? Quite frankly, with mold, the best way around them is to prevent their growth in the first place.

How to clean hard water stains?

Normal stains and dust particles can be cleaned with just a clean towel and water. But the removal of hard water stains is another ball game entirely. No, I don’t mean to scare you. You see, these stains are left there due to the presence of dissolved minerals in the water. When done the right way, you can get rid of these stubborn stains and restore the beauty of your shower glass once more.

Listen, there’s no one size fits all solution to getting rid of hard water stains. You can try a lot of things until you find what works for you. Not only economically, but also what’s readily available to you for your glass cleaning needs.

Below are three of the best ways to get rid of stains in your home. With:

Vinegar mix: mixture of lemon juice and vinegar

A mixture of lemon juice and vinegar can prove useful for your cleaning needs. The mixture is stored in a bottle that can be sprayed directly on the glass. Alternatively, baking soda and a mixture of hot water and vinegar can prove useful too.

Dishwashing soap that cleans the washes the frame

Although very basic as cleaning solutions, they can help keep your glass sparkling for a very long time. Applying the appropriate pressure, you can achieve some level of cleanliness.

White vinegar that loosen the mineral deposits for a perfect clean look

The acidic composition of vinegar makes it a favorite of homeowners for most if not all their glass cleaning needs – loosening the mineral deposits to leave behind a sparkling glass.

Steps to removing hard water stains from glass include:

  • First, remove dust and debris and clean it with a squeegee.
  • Apply your mix of vinegar and baking soda on the glass and scrub
  • Ensure all affected areas are properly scrubbed using the vinegar mix
  • Leave for a few minutes (5 minutes) before washing off with warm or cold water (the warmer the better).
  • Repeat the procedure if the stains remain until nothing is left but your sparkling glass.
  • Wash the glass very well and dry with a microfiber cloth.

How to Clean Mold?

The presence of mold in your bathroom signals the lack of ventilation that can be breeding grounds for molds especially when there’s a lot of moisture.

While there are a lot of mold cleaning solutions in the market, the use of bleach and water can do the work perfectly. While wearing a glove or protective clothing, spray the mixture of bleach and water on the mold or use wet a clean cloth with the mixture and wipe the affected areas.

After cleaning, consider leaving your doors and windows open for more ventilation. Ultimately, you will need to carry out regular cleaning exercises to avoid a reoccurrence.

Tips to keep the glass clean to avoid further development of stains or mold

With hard water stains and molds, the battle is not won once. You have to show up often with your cleaning tools and solutions to save your glass.

However, there are simple steps you can take to reduce the occurrence of stains and molds on your glass. Top of the list is the regular use of vinegar solution on your glass to make them easy to clean.

To save you the stress, immediately clean water droplets off your GLASS SHOWER DOOR to prevent those stubborn stains that give you a hard time cleaning. If you have a squeegee, use it to wipe the water off the glass.