The installation of a magnetic screen door is not a lot of things to do. The process is simple, and it will be done before you know it. All that you need to focus carefully is on the measurements so that there are no problems for you later on during the procedure of installation of a magnetic screen door. The magnetic strips are attached with the magic Mash, and you can easily open and close a door without any efforts. Once you have installed the magic mesh screen door, you can open and close it effortlessly whenever you want.
In this article, we are going to discuss how you can install a magnetic screen door. So keep on reading to find out more information below about the magnetic fly screen.
First of all, you need to spread the magic measure on the floor. Ensure that the magnet is aligned in the center.
The second thing that you need to do for the installation of the magic my stories to check whether the magnets are aligned asymmetrically or not. The magnets must line up asymmetrically; otherwise, your installation will not be both. Make sure that you do not leave a gap between the magic mesh; otherwise, the insects can crawl into your house through the door.
Twelve adhesive strips come along with the magic mesh frame. All that you need to do is to attach 30 adhesive strips with the magic mesh frame. You can easily do this by removing the sticker from the backside of the adhesive strip.
Make sure that you clean the door before the installation of the magic mesh. You can kill that work properly with the damp cloth and remove all the dirt from the door. If the door is dirty, then you will not be able to have a seamless and smooth and installation of the magic mesh on the door. Make sure that the door is dried completely before you begin the installation process of the magic mesh screen.
Ensure that you have already measured the height of the door to find out how high you want to hang the screen. You can do this by using a simple measuring tape at your home to measure the height of the door frame. This way, you will be able to easily calculate how high you want to hang the magnetic screen door on the frame of your door.
In this step, you need to measure the width of your door Halfway. You need to mark the width of your door at the halfway point and noted down.
Make sure that you attach the upper part of the magic match before the lower part. This way, you will be able to easily install the magic mesh frame due to the adhesive tapes in a seamless manner to the door frame.
By following the same process mentioned above, you can stick the rest of the match with the door frame. Make sure that you attached the top part first and then attached the rest of the bottom part of the magnetic screen door with the frame.