Kitchen surfaces and appliances need different cleaning methods. Identify the material, the food-contact requirements and the manufacturer’s advice before choosing a product. An ingredient being familiar or natural does not make it suitable for every finish.
1. Clear the surface and identify the residue
Remove ordinary loose food and separate washable items from equipment that must not be immersed. A greasy surface, a mineral deposit and a damaged finish are different problems. Choose the appropriate method rather than escalating to a stronger mixture.
2. Clean removable hob parts as directed
Check which parts can be removed, the permitted cleaning method and how they must dry before refitting. Do not put unidentified metal parts in a bag of ammonia fumes overnight. Coatings, seals and appliance designs vary.
3. Use one compatible product
Read the cleaner label for handling, ventilation, dilution and rinsing. The CCOHS guide explains why different cleaning products should not be mixed. Do not add lemon oil, vinegar or another ingredient to a prepared cleaner or use an unlabelled container.
4. Follow the microwave manual
Allow the appliance to cool and use the owner’s cleaning procedure. Avoid soaking controls, vents or electrical parts. A method suitable for a removable tray may not be suitable for the whole interior or its coating.
5. Empty toaster crumbs by the permitted method
Follow the manual’s shutdown, cooling and crumb-tray instructions. Keep liquids away from electrical parts and do not insert a utensil to dislodge food from an energised appliance. Stop if the appliance is damaged or cannot be cleaned as directed.
6. Match sink and worktop care to the material
Read the finish or stone supplier’s advice before using acidic or abrasive products. Test only where appropriate and avoid treating vinegar as a cleaner for every material. Rinse food-contact surfaces as the product requires.
7. Keep floors usable while cleaning
Use the flooring manufacturer’s cleaner and control the amount of water. Do not add oil for fragrance or leave a slippery film. Keep the route clear and allow the floor to dry before ordinary use.
8. Address odours and repeat buildup
Clean bins and removable containers appropriately, inspect for a recurring leak and maintain ventilation. Fragrance does not establish that the source has been removed. Record persistent problems and arrange assessment rather than repeating an unsuitable cleaning hack.














